Endress + Hauser’s Promass E 200 two-wire Coriolis flowmeters

Tired of using mechanical counters? New instrumentation offers smooth integration into your process…and no moving parts.

As a long-term user of mechanical sensors such as positive displacement meters or turbines for flowmetering applications, who better than you knows the serious disadvantages of these: moving parts cause drift over time, they are subject to wear and therefore require all too frequent maintenance in order to avoid the risk of breakdown — even the filters require periodic attention.

Endress+Hauser can assist to reduce periodic maintenance of your instrumentation without influencing process availability. The solution Endress+Hauser offers is to use counters with no moving parts, offering better performance and a reduction of the Total Cost of Ownership (TCO) compared to their mechanical counterparts. How would you like a sensor that you could easily install in your existing application that would offer reliable event diagnosis according to NAMUR?

Is it time to consider a replacement?
Consider replacing your mechanical counter with the Promass E 200 Coriolis flowmeter. This two-wire loop-powered (4-20mA HART) device offers seamless mechanical, electrical and digital integration to existing sites, providing an excellent solution to process modernisation.

Maximise your process performance
This Coriolis flowmeter simultaneously measures mass, volume, density and temperature: you don’t need to combine several device technologies. Measuring either volume or direct mass, the device offers linear accuracy and higher repeatability. Hydraulic losses are reduced. The high resonance frequency enables total immunity to process vibrations. The detection of build-up increases process reliability.

“Is this device really for me?”
The measuring principle is completely applicable to homogeneous single-phase fluids (viscosity < 20000cP), solutions that include dissolved substances and batch applications lasting more than 10 seconds. For other applications, please contact the Endress+Hauser sales team.

Designed according to SIL IEC61508, the Promass E 200 fits for SIL2 or SIL3 safety applications. Intrinsically safe or explosion-proof options meet the major hazardous area application requirements (ATEX, IEC, CSA, NEPSI, TIIS, etc.). The solution meets the requirements of the chemical, oil and gas, and life sciences industries.

Easy and cost-effective inline installation
The measurement is not influenced by the medium’s viscosity and the flow profile, therefore no inlet run is required. Better still, no holder and no filtration is required! You can use existing HART cabling to connect the sensor to the network (PLC, remote I/O, etc.).

Secure commissioning
New standardised Human Machine Interface (HMI) makes your life easier during commissioning. Plain text messages are displayed in your choice of language, giving you confidence in the settings you have selected. This HMI will be used in all future Endress+Hauser instrumentation.

Simple maintenance
With insignificant drift over time, the Coriolis technology requires much fewer calibrations and is subject to considerably less troubleshooting than your current device. The Promass E 200 includes event management functionalities that allow fast and secure interventions.

The embedded HistoROM ensures automatic data backup, avoiding the need to set up after exchanging the electronics. Designed from intermixable/ interchangeable parts, Promass E 200 contributes to spare parts stock reduction.

For further details contact Frans van den Berg of Endress+Hauser on TEL: 011 262 8000

or visit: www.za.endress.com