PtSA driving appeals for tool, die, mould and special machining sectors.
Local manufacturers reliant on imported high-strength steel tools and suppliers of tungsten carbide products and cutting tools have approached the government for relief from sweeping new tariffs that were introduced in May 2026 following preliminary determinations after the first phase of the review the tariff and rebate structure to protect domestic manufacturing capacity, which was completed last year. Protection on a range of steel products was increased to the World Trade Organisation (WTO) bound rate, which in most cases was 10%, but included tariffs of up to 30% on certain downstream products such as bolts, nuts, screws, rivets and similar products. At the same time, some additional rebates were created for steel products not manufactured in South Africa.
The tariffs now imposed on certain tungsten carbide products and cutting tools have effectively increased the cost of production for local manufacturers that rely on these inputs to produce a wide spectrum of components used by many different industries and not just those involved in metalworking engineering. Virtually anything that you see around you would have at some stage had a cutting tool influence, whether it is your computer screen, your cellphone, your vehicle or the beverage you drink. This is the reality of what might not be comprehended by those that take these decisions to implement tariffs. It makes it even more bizarre when the majority of the carbide products, high-strength steels and cutting tools that are now subject to a tariff are not produced locally.

Additional requests
ITAC says it received 109 written submissions from interested parties subsequent to the publication of its initial findings in August 2025. After the publishing of Report 764 in May 2026 ITAC notes that there have been further submissions calling for either additional products to be considered for possible duty increases or import controls, as well as requests for the creation of additional rebate provisions.
There is no mention of the objections received by ITAC. But there have been a number and Production Technologies Association of South Africa (PtSA) is one of them acting on behalf of its members.
“The R13 billion local tool, die, and mould-making manufacturing sector requires specialised steel that is currently unavailable from domestic producers. High-strength steel is primarily used to manufacture precision cutting tools, such as end mills, drills, and taps, as well as wear-resistant components like piercing and ejection punches,” said Tapiwa Samanga, Group CEO of the Production Technologies Association of South Africa (PtSA).
“We have established that for the tool, die, mould and special machining sectors, the biggest and one of the most urgent impacts is on high-strength steels. We are therefore appealing to the government for a reversal of the applied measures or an expedited, backdated rebate,” continued Samanga.
It is said the local tool, die, and mould-making manufacturing sector is valued at R13 billion per annum, with associated maintenance services contributing another R2 billion per year.
“Because over 85% of TDM demand is currently fulfilled by imports, the value of locally manufactured and supplied tooling (excluding imports) is R2 billion per year,” PtSA notes in a briefing document prepared ahead of its exemption application. “The domestic industry is currently heavily reliant on imported tooling, dies and moulds.”
The Cape Chamber of Commerce and Industry helped facilitate the dialogue in the hope of expediting the process of rebates
To whom it may concern
One of the leading importers and suppliers of manufacturing tools, machining solutions and knowledge has written to ITAC requesting that the authority review this decision because of the impact of these tariffs has on downstream manufacturing industries. Castings SA has been provided with a copy of a submission that has been sent to ITAC. Herewith a copy of the correspondence.
“I am writing to formally express concern regarding the tariff measures implemented and gazetted with effect from 15 May 2026, which were introduced with the objective of safeguarding and supporting the South African steel and automotive manufacturing sectors. According to SARS’ tariff amendment notice, these measures increased customs duties on various tariff subheadings under Chapters 72, 73, 82 and 83 following ITAC Report 764.”
“While we fully support initiatives aimed at strengthening local industrial capacity and encouraging domestic manufacturing, the current tariff structure is having significant unintended consequences for the South African cutting tool industry and the broader manufacturing sector. The tariffs now imposed on certain tungsten carbide products and cutting tools have effectively increased the cost of production for local manufacturers that rely on these inputs to produce automotive components, engineering products, mining equipment, aerospace components, and other value-added manufactured goods. Industry discussions and internal business assessments indicate that ITAC-related tariffs have become an additional landed-cost layer.”
“Tungsten carbide cutting tools are not merely imported finished goods competing against local production. They are essential production inputs enabling precision machining, productivity, quality control, and competitiveness within South African manufacturing operations. Unlike many consumable products, cutting tools directly influence the efficiency and cost competitiveness of local manufacturers who compete both domestically and internationally.”
“The consequence of the current tariff regime is that downstream manufacturers face:
• Increased production costs.
• Reduced competitiveness against imported finished components.
• Higher costs for export-oriented manufacturers.
• Reduced investment attractiveness in local manufacturing operations.
• Increased pressure on small and medium-sized engineering businesses already operating under challenging economic conditions.”
“In many instances, the tariffs do not promote meaningful localisation, equivalent technology, performance levels and production capacity are not available locally. Instead, the tariffs create additional costs for manufacturers without delivering corresponding benefits in local industrial development. This situation is particularly concerning for the automotive component sector, where South Africa’s competitiveness depends on maintaining globally competitive production costs and productivity levels.”
“Modern carbide tooling is a critical enabler of advanced manufacturing and Industry 4.0 production environments. Any increase in tooling costs is ultimately reflected in higher component costs, reducing South Africa’s attractiveness as a manufacturing destination.”
“Furthermore, the timing of these tariff increases coincides with significant increases in global tungsten carbide and cobalt input costs, as well as broader supply chain pressures experienced throughout 2025 and 2026. The additional tariff burden compounds these cost pressures and amplifies their impact on local manufacturers. Internal industry analyses have specifically identified tungsten, cobalt, and ITAC-related tariffs as cumulative cost drivers affecting the carbide tooling supply chain.”
“We respectfully request that ITAC undertake a review of the impact of these tariffs on downstream manufacturing industries and consider:
1. Excluding tungsten carbide raw materials and semi-finished carbide products from the tariff scope.
2. Implementing rebate provisions for manufacturers who utilise carbide tooling in the production of export goods until or if the tariff is fully removed.
3. Introducing tariff exemptions where no equivalent local manufacturing capability exists.
4. Conducting a comprehensive economic impact assessment on downstream industries before further tariff expansions are considered.
5. Engaging directly with stakeholders from the cutting tool, engineering, metalworking, mining equipment and automotive component sectors.”
“South Africa’s industrial policy objectives should support the entire manufacturing value chain rather than unintentionally increasing costs for industries that create employment, drive exports, and contribute to economic growth.”
“We remain committed to supporting local manufacturing and industrial development. However, we believe the current tariff measures require reconsideration to ensure that they do not undermine the competitiveness of the very manufacturers they seek to protect. We would welcome the opportunity to participate in any consultation process and to provide further information regarding the impact these measures are having on the cutting tool and precision manufacturing sectors.”
New comment document
Subsequent to ITAC’s shock publication in May 2026 it has now published another notice on 18 September 2026 (NOTICE 4157 of 2026) where it has proposed increasing customs duties on several steel products to their respective World Trade Organisation (WTO) bound rates. The proposed increases cover a range of products.
However, ITAC has also proposed new rebate provisions for certain steel products that are not available in the Southern African Customs Union (SACU) market. Products classified under tariff headings 82 and 83, which cover cutting tools and industrial blades, are now being considered for the full 20% rebate provision.
The notice calls for interested parties to make comment. Interested parties have until 16 October 2026 to submit representations.
ITAC has stressed though that final determinations would be made only once the Commission had considered comments on the preliminary determinations.
for further information visit https://itac.org.za/wp-content/uploads/ITAC-Notice-4157-of-2026.pdf
